TinkerTool System 5 is electronically distributed software which is offered following a “First try, then buy” principle. You can download the application free of charge and test whether it fits your needs. You can select between two different modes of testing the program, named Evaluation Mode and Demo Mode.
Evaluation mode allows you to use the software without any limitations, no matter if you own a registration or not. Only the following restriction applies:
You can launch the application five (5) times per computer only. After five launches, evaluation mode will end and can no longer be enabled for any copy of this application having the version number you have evaluated. After the evaluation period has ended, the program will fall back to demo mode.
Certain conditions must be met to activate evaluation mode, however. To check whether your computer is eligible to test the current version of the application, it has to request permission from us via Internet. This permission is also known as evaluation ticket. Such a ticket is usually issued immediately, after a few seconds. To receive a ticket, the following conditions must be met:
After a valid ticket has been received, it will be stored on your computer and the application will be unlocked for evaluation.
Without a valid registration (and after the free evaluation period has ended), the application will operate in demo mode only.
The following features of TinkerTool System can be used in demo mode:
If you like to use the software permanently, you’ll have to place an order for the required number of usage licenses. For each license you will receive a so-called registration file containing a registration code which will allow you to switch the application from demo mode to normal operation.
Distributing or leasing the application or its license to third parties is prohibited without prior written permission. In particular, you have no permission to transfer the registration to somebody else. The exact contractual obligations for licensing the software are shown and can be printed after you have opened the downloaded software package.
Placing an order for registration codes of TinkerTool System 5 is possible via our distribution partner. The order can be placed via Internet, postal mail, telefax or phone. After our sales partner has acknowledged your payment, you will receive the requested number of registration codes as a single file. For an online order, you can download this file immediately after your order was processed, from the same web page where you placed the order, so no actual “delivery” will be necessary. You will receive an additional copy of the registration file together with your invoice by email. Payments are accepted in more than 40 different international currencies, with all common payment options supported.
To learn more about placing orders, please use the following Internet page of TinkerTool System 5:
For first written information, you can alternatively select the menu item Help > Purchase Registration Key… in the application.
The registration info needed to fully unlock the application can have been delivered to you in two different forms, either as a file with a ticket icon, or as readable text with two entries named Registration Name and Registration Key. Delivery by file is the preferred method used for all recent orders, because the unlock procedure only requires a simple double-click.
The necessary unlock procedure differs, depending on what type of registration you have received. The software can automatically guide you to the correct way of data input if necessary. Just press the button Activate a purchased registration… in the registration window to start this assistance.
The two following sections describe both unlock procedures in detail. Only one procedure will apply to you.
This section describes how to use a registration file you have received from the software reseller. If you have received a pair of Registration Name and Registration Key directly from Marcel Bresink Software-Systeme via email (which is the case if the order was placed before June 2016), please skip this section and look for more information at “Unlocking the Software with a registration mail” below.
Unlocking the software by registration file requires that your computer is connected to the Internet. (If you don’t have an Internet connection, an alternative solution might be possible, but only in specific cases. Contact us for more information.) You should have received your registration file from the software reseller by download, after your order had been processed successfully. Note that this file represents a value, so it should be archived at a safe place, e.g. by copying it onto a USB memory stick reserved for that purpose.
If you had ordered multiple licenses for the same application, each registration will be represented by a separate registration file. The reseller has packed them into a single “zip” file for the download. You can unpack this zip file by double-clicking it in the Finder.
A registration file is presented with the icon of an “MBS key card” and has a name ending with the marker “mbsreg”. We assume that you had tested the application before placing the order for a permanent license, so both the program and the registration file should now be onto your computer. To unlock the application, perform the following steps:
If your operating system is affected by technical problems, so it cannot locate the downloaded application for some reason, you can also load the registration file manually in the program:
If your Internet connection is not working correctly, or in the rare case that all licensing servers have technical problems, you will receive a related error message. In that case, please follow the instructions given in that message.
The registration becomes valid for all user accounts of that computer.
This section describes how to use a registration message containing a pair of Registration Name and Registration Key you have received via email directly from Marcel Bresink Software-Systeme (which is the case if your order was placed before June 2016). If you have received a registration file from the software reseller instead, please see the preceding section “Unlocking the Software with a registration file”.
Please note that the registration code you have received by email represents a value and should be archived at a safe place for future reference, e.g. by printing it on paper. The code consists of two parts, the Registration Name and the Registration Key.
To unlock the software, you will have to transfer the pair of Registration Name and Registration Key from your email message to the application. You can always do this manually, but in specific cases, a single mouse-click might be sufficient. This easy and quick unlock procedure is called One-Click Registration. You can use this simple method under the following conditions:
If any of these four conditions are not met, you must enter the registration pair manually. In that case, skip to the next paragraph below.
Unlocking the software for all users of the computer simultaneously is not possible by one-click-registration, because macOS must ask for an administrator password in this case. A one-click registration always becomes active only for the user who clicks on the arrow marker.
Old registration messages sent before July 2012 do not support one-click registrations. Copies of registration messages which have been readdressed or redelivered to you due to reception problems may also not support one-click registration.
Perform the following steps to unlock the application for unrestricted usage. These steps will always work, no matter how you received or stored the registration data, and they will allow you to unlock the application for all user accounts of a single computer if you like to do so:
If both parts of the code have been entered correctly, the window MBS Product Registration will show your Certificate of Registration, with details about your license. You can close the window. If some part of the code has been entered incorrectly, an error message will be displayed. In this case, please check both parts of the code for exact match with the e-mail message which had been sent to you.
macOS will ask for an administrator password if you selected the option to activate the key for all users.
We may offer special licenses that permit to switch from a different product to the current version of TinkerTool System 5. In this particular case, two registrations must be entered to unlock the program: one for the current application, and one for the application you previously used. The steps are the same as outlined in the previous sections, you only have to perform them twice. Please take care not to confuse the two different registrations.
You can deactivate the registration any time. Please perform the following steps:
You usually don’t need to care about your registration if you replace your copy of the application by a free update. Just drag the icon of the new version into the same folder where you have stored the previous version. The Finder will ask you if the old copy should be replaced. After the new version has been copied, you can simply launch it, and your registration will still be intact.
When migrating to a new computer, the situation could be different: If the application was unlocked by a personalized registration received by email (with a Registration Name), you can simply use Apple’s Migration Assistant to transfer all files of your system. Your registration will still be preserved and you won’t need to re-enter it.
However, if the application was unlocked by use of a registration file (no visible Registration Name), you will need to activate your registration once again, using the instructions given previously in this chapter.
If you need software licenses for an organization with a large number of computers, a single volume license can be used more efficiently than having separate licenses for each system. We may offer site licenses (for use on all computers of an organization located at one contiguous geographical site), and global licenses (for use on all computers of an organization worldwide), depending on product.
Site and global licenses delivered before June 2016 were automatically connected to a kind of subscription service which gave administrators access to special copies of the application that had embedded volume licenses in them. These customized software versions could be copied freely within the organization and were “pre-registered”, so the maintenance effort for administering registrations was kept at a minimum. This subscription plan was discontinued in June 2016.
As of that date, the distribution of custom software versions has been superseded by a new method, which works just as easy:
So instead of just copying the application package only, a single additional file must be copied onto the destination computer. Note that each computer requires a working Internet connection when launching the application for the first time.
Ensure that you have already registered the application on one computer. Then perform the following steps:
Each time you need to install the software on a new computer of your organization, you can have the application automatically register itself:
That’s all. The application will auto-register as soon as it is launched. When the volume license could be confirmed via Internet, the auto-registration request file is automatically removed, so it cannot fall into wrong hands.